Luxury Passenger Elevator, Hotel Elevator, Commercial Elevator (OEC-J008)

This is OEC Luxury  Passenger Lift For Hotel  (OEC-J008)

Great performance does not require a machine room but a great technology which lives up to ever increasing demands on efficiency,flexibility and safety for every investment,saving  space and installing time.Saving more construction cost and having the great potential to increase the value of the real  estate,more localized strategy and more convenient maintenance.

Passenger elevator adopts international advanced vvvf AC transformation and frequency control achieves easy operation.It is widely used in
hotel,restaurant,store,office,building,business and residence building and so on,In order to ensure high level stable and reliable operation of elevator.The adoption of digital control technique and serial communication will make the elevator with accuracy,high speed and energy saving and improve its operation performance. The reliability is improved due to elimination of a number of connections and contact.

Elevator cabin
Decoration wall : Mirror ,Etching, Hairline, Finish
Car decoration roof /Ceiling: Stainless steel mirror hollow board and white transparent board,hairline stainless steel frame(OEC-T002)
Handrail: Φ 38stainless
Floor:  PVC (OEC-D008)
Persons: 6-21
Capacity: 450 / 630 / 800 / 1000 / 1150 / 1350 / 1600 (kg)
Speed: 1.0-1.75m/s
Travel: ≤76(m)

Control cabinet

Thank you for concertrate on OEC elevator , if you have any question  please feel free to contact us !

Contact person: Sarah /venice
Tel: 86-15899818873   0757-85409511

Feature
Description
Remark
Full collective operation
The momentary pressing on one or more car buttons shall send the car to the designated landing in the ordering which the landings are reached by the car irrespective of the sequence in which the buttons are pressed. During this operation, the car shall answer calls from the landings which are in the prevailing direction of travel, and each call shall be canceled when answered.
Standard
Molded Circuit Breaker
Protects the elevator control equipment from unusual voltage surges in the building power supply
Fireman Operation
In case of fire , a firemen can use the elevator which is stopped at the specified floor set in advanced.
Absent or Mistaken Epsilon Phase Device
While absent or mistaken epsilon phase, the safe electrical circuit will cut out, and safety gear act. it will make the elevator stop.
Attendant operation
The operating mode of an elevator can be changed from the normal full-automatic operation to the attendant service by an attendant switch, when required.
Door open guarding
In automatic operation, the elevator only stop at the floor registered
Microcomputer self-inspection
Though you restart the system, the microcomputer will scan the I/O point in control system. If any abnormity in control system, the elevator will stop.
Self-adjustment
The control system can self-adjustment position, when actual position data is not compatible with the data in memory.
Automatic speed set
The high, medium and low speed can be simultaneously set in microcomputer base on different distance.

Screen display in microcomputer
The debugging and operation information is displayed in the screen of microcomputer
Engine guard device
While start the elevator, the traction can't work or rope skid in set time. The elevator stop immediately.
Inspection and repair operation
Manual operation in low speed, while the elevator is inspecting or repairing.
Full load bypass
If the car full loads, the elevator will automatically ignore all the hall calls in the direction of service and respond car calls only. The hall calls remain registered and will be served on the next trip (single car),or by another elevator (group).
Flexibly set floor display and stop
Special typeface and the stop floors can be set flexibly
Problem alarm
Any problem is inspected, the microcomputer will transfer the operation to prohibition mode. Only resume the button , the elevator can operation again
Mechanical Lock
The mechanical lock of elevator has a single input point to control.
Contactor
The elevator won't work, if the contactor isn't release in the latest operation.
Standard
Alarm button
Any unusual thing is appeared, press this button for help
Car door safety edge
Extending the full height of the car door, this device causes the doors to return to the fully open position, should the door encounter a person or obstacle while closing
VIP Operation
A specified car can be withdrawn form group control and carries out independent operation in accordance with the hall call for VIP
Load weighting device
Detects unusual load conditions and prevent elevator from further movement with the buzzer sounding until the overload is corrected
Terminal limit switches
Prevent the elevator from traveling beyond a terminal landing.
Buffers
Located in the elevator pit area below the car and counterweight, if buffers are engaged.
Over-speed governor
It can ensure the car's running speed in normal range to protect the passenger and goods from danger.
Elevator locked
Switch off the two position key switch which mainly located at base floor, then car will run to appointed floor with door-open status and cancel all registered calls.
Fault information recorded
fault information (fault code, time, floor) and last detailed fault information (fault code, time, floor, current, voltage etc) will be recorded for reference.
Emergency cab lighting
Provides interior cab lighting, should there be a failure in the building's normal power supply
Anti-nuisance operation
In case of substantial difference between the number of calls registered on the car operating panel and actual load in the elevator, the elevator prevents unnecessary operation by canceling all registered calls when it arrives at the nearest floor.
Automatically parking
During off-peak hours, after the elevator cars have been dormant with door closed for a predetermined amount of time, the system disperse each car to a designated location (base floor or main floor), thus allowing more efficient service to future hall calls
Standard
Car light & fan automatically shut off
Elevators can be installed with an energy saving feature that automatically switches off the car
internal lighting and ventilation fans when no calls are registered after a predetermined period of time.
Arrival chime
An electronic chime provides an audio signal to inform waiting passengers of the arrival of the elevator car at each floor. The chime can be mounted on the top or bottom of the car, or at each floor if required
Hoistway parameter self-learning
Controller can learn the parameter of hoistway by automatically running. The information comprises total floor, floors height, rise etc.
Voice synthesizer
This system provides riding passengers with audio information about car operation such as direction of travel, landing floor, etc
Option
Remote / residential supervisory system
This system monitors elevator operations and conditions of emergency operations
Group Control
( series )
The group control system for two or more elevators employs artificial intelligence and fuzzy logic. The big-best refined knowledge and experience harnessed in the field of group control have been incorporated into the microprocessors, allowing car assignments to the most used location, and thereby providing superb elevator efficiency and optimum service.
Remote debugging
Through a network ,debugging some parameter and slight problem.
Fire emergency return
When the elevator is receiving a fire signal, all calls are cancelled and all the elevators will immediately travel to the main landing. Then send a feedback signal to manage center.
LED display
The information can be display on LED in the car
Emergency power operation
If normal building power supply fails, the elevator at a time will proceed to the lowest landing in low speed in order to evacuate passengers.
Door protective device
It is a multi-beam light ray type door protective device, which surveys the car entrance. When a passenger or an object passes the entrance, the elevator will stop the doors at the point of contact and re-open the car doors immediately
Option
Type
Speed(m/s)
Dimension
Door Size(mm)
Door Type
Hoistway net size(mm)  
Machenic House Size(mm)
Min Top Height(mm)
Min Bottom Depth(mm)
TKJ-VF
1.0
2000*1750
1100*2100
Mid-opening
2600*2550
3000*3000*2500
4500
1500
TKJ-VF
1.5
2000*1750
1100*2100
Mid-opening
2600*2550
3000*3000*2500
4600
1600
TKJ-VF
1.75
2000*1750
1100*2100
Mid-opening
2600*2550
3000*3000*2500
4700
1700
TKJ-VF
2.0
2000*1750
1100*2100
Mid-opening
2600*2550
3000*3000*2500
5000
2000
TKJ-VF
2.5
2000*1750
1100*2100
Mid-opening
2600*2550
3000*3000*2500
5500
2300